Verilink PRISM 4001 (CG) Configuration/Installation Guide Manuale Utente Scaricare il pdf

TRANSPORT

PRISM 4151

Configuration Guide

45-00105

3.0

Front Panel

Network Interface

Line Rate: 56 and 72 kbps

Input Signal: 0 to -45 dB ALBO

Connection: RJ-48C jack

Output Signal: 3.32 V (±10%) base-peak into

135 Ω with protection per 62310

Transient Voltage: 1000 V protection, fused in/out

Jitter Control: per 62310

Timing Source: Internal, recovered line clock,

external DTE

Equipment

Interface

Data Rate: Synchronous 56K DDS I , 64K

DDS II

Antistream Timer: Off, 10, 30, or 60 seconds

DTE Clocking: Internal or External

DTE Connection: 34-pin V.35 (CCITT)

Management Interfaces

Supervisory Port

Connection: 8-pin modular (RS-232)

Data Rates: 19.2 kbps

SLIP Port

Connection: 8-pin modular (RS-232)

Data Rates: 1.2, 2.4, 9.6, and 19.2 kbps

SNMP/Telnet Ethernet (option)

Connection: 8-pin modular (RJ-45)

Network Protocol: TCP/IP based networks

Data Rate: 10 Mbps

Compatibility: 10BASE-T, ISO.IEC 8802-3

SNMP/TELNET/Token Ring

Connection: 8-pin modular (RJ-45)

Network Protocol: TCP/IP based networks

Data Rate: 16 Mbps

Compatibility: Type 3 UTP, ISO/IEC 8802-5

Diagnostics

Loopbacks: V.54 (receive and send), alternat-

ing loop, latching loop

BERT: 511 pattern

Alarms

Activation: Programmable thresholds

Reporting: Front panel LEDs, call on

alarm (COA), SNMP traps

Power

115 VAC: 100 mA, 12 W max, 30 BTU max

Mechanical

Mounting: Desktop or rack

Dimensions: 12 inches (30.48 cm) wide

2 inches (5.08 cm) high

9 inches (22.86 cm) deep

Weight: 4 pounds (1.814 kg)

Environmental

Operating Temp:32° to 122°F (0° to 50°C)

Storage Temp: -4° to 185°F (-20° to 85°C)

Humidity: 95% maximum, non-condensing

ALARMNETLOOPTEST

TEST LOOP

POWER

21 43 5 6 7

PRISM 4151

TRANSPORT

Specifications

Front Panel Description

Index Item Function

1 TEST

(button)

When this button is pushed once, the unit transmits five seconds of V.54 loop code out to the network. The indicator blinks amber

during transmission of the loop code. When the V.54 loop sequence is finished, a 511 BERT pseudo rendom sequence is

transmitted. The received pattern is compared and if it is error free, the TEST indicator remains green. If pattern errors are

detected, the TEST indicator turns red for a minimum of one second. If the TEST button is pushed again, the unit transmits five

seconds of V.54 loop down code and returns to normal operating mode. The TEST indicator is then turned off.

2 LOOP

(button)

When this button is pressed once, the unit activates a line loopback, looping the network receive data back to the network, and

looping the data from the DTE ports back to the DTE. The LOOP indicator is lit while the unit is in loop. If pushed again, the

unit clears the loop and turns off the LOOP indicator.

3 TEST This 3-color LED is green when BERT is on with no errors. It flashes amber when the unit is transmitting loop or unloop code.

It is red when the BERT is on and is receiving errors or is out of pattern sync.

4 LOOP This amber LED illuminates when the unit is in any loop condition.

5 NET This 3-color LED illuminates green when the unit is in frame sync. It is red when the unit is out of sync and/or Loss of Signal.

6 ALARM This red LED illuminates when the unit is in an active alarm condition.

7 POWER This green LED illuminates when power is applied to the unit.

1 2 3

Sommario

Pagina 1 - PRISM 4151

TRANSPORT®PRISM 4151Configuration Guide45-001053.0Front PanelNetwork InterfaceLine Rate: 56 and 72 kbps Input Signal: 0 to -45 dB ALBO Connection: RJ

Pagina 2 - Local Loop

TRANSPORT®Rear Panel PinoutsPinLAN EthernetLAN Token RingSUPV/SLIP Terminal SUPV/SLIP Modem Network1 Data Out DCD Out DTR Out Data Out 2 Data Out CT

Pagina 3 - Addendum

PRISM 4151 Page 1 of 1 TRANSPORT®45-00105-A3.01AddendumDocument:Date:34-00258-A3.01The power rating, as presented on pages 1-2 of the manual and in th

Commenti su questo manuale

Nessun commento

Verilink PRISM 4001 (CG) Configuration/Installation Guide Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware del computer Verilink PRISM 4001 (CG) Configuration/Installation Guide. Verilink PRISM 4001 (CG) Configuration/Installation Guide User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware del computer Verilink PRISM 4001 (CG) Configuration/Installation Guide