Verilink Craft Interface (No Part Number) Product Manual Manuale Utente Scaricare il pdf

Verilink Craft Interface Craft-1

Craft

Using the Craft Interface

This part of the Management Section describes how to use the Craft

interface to manage AS2000 and AS3000 nodes. With the Craft

interface, you can access AS2000 and AS3000 controller modules

from a PC or terminal using a direct or Telnet connection.

This document describes:

•

Setting up

• The Main Menu

• Sample submenus

Setting up

The connection between an ASCII terminal and AS2000 modules

may be direct or through Telnet. If you plan to use Telnet, you still

must first use a direct connection to set up network parameters.

Direct

Connection

The Craft interface can be accessed through a direct connection to

the node controller (SCM, NCM, SCC, NCC) or shelf controller. From

an ASCII terminal or PC with terminal emulator program, proceed

as follows:

1. Connect the ASCII terminal to the port labeled C

RAFT

or L

OCAL

on the front panel of the module. Use the Craft cable (P/N

458-501788-008) described in the “System Cables” appendix

of the

AS2000: The Basics

user

manual.

2. Go to the terminal settings screen of your terminal or terminal

emulator. If you are using Windows 95 Hyper Terminal, use

the File>New Connection pull-down menu to access the

parameters. If you are using the Window 3.1’s Terminal

program, choose the Communications option from the

Settings pull-down menu to access the parameters.

3. Set your terminal parameters to the following values:

• 19.2 kbit/s baud rate

• 8 data bits

•no parity

•one stop-bit

• no flow-control

• X-ON, X-OFF disabled

1 2 3 4 5 6 7 8

Sommario

Pagina 1 - Using the Craft Interface

Verilink Craft Interface Craft-1 CraftUsing the Craft InterfaceThis part of the Management Section describes how to use the Craft interface to manage

Pagina 2 - Logging On

Using the Craft InterfaceCraft-2 Verilink Craft InterfaceUsing Telnet Telnet access is available for the SCM, NCM and SCC controller modules. Prior

Pagina 3 - The Main Menu

Using the Craft InterfaceVerilink Craft Interface Craft-3 The Main MenuFigure 2 defines the parts of the Main Menu. Figure 2 The Main Menu Interpret

Pagina 4 - Selection Brackets

Using the Craft InterfaceCraft-4 Verilink Craft InterfaceThe currently selected card is shown in the command line prompt which returns after each com

Pagina 5 - Entering

Using the Craft InterfaceVerilink Craft Interface Craft-5Command LinePromptThe initial prompt defaults to the module directly connected to the Craft

Pagina 6 - Selecting an

Using the Craft InterfaceCraft-6 Verilink Craft Interface•A letter followed by a parenthesis, A), indicates a user-settable option.Selecting anElemen

Pagina 7 - Sample Submenus

Using the Craft InterfaceVerilink Craft Interface Craft-7The command-line prompt reflects your selection in the shelf and slot field (shelf 2, slot 3

Pagina 8

Using the Craft InterfaceCraft-8 Verilink Craft InterfaceFigure 5 T1 Port Configuration Menu For application-specific menu options, see the applicati

Commenti su questo manuale

Nessun commento

Verilink Craft Interface (No Part Number) Product Manual Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware del computer Verilink Craft Interface (No Part Number) Product Manual. Verilink Craft Interface (No Part Number) Product Manual User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware del computer Verilink Craft Interface (No Part Number) Product Manual